How to Tile Subway Tile Backsplash

Big news update!

My movers moved up the moving day to TODAY.  So, I’ll be scurrying around like crazy getting at least my furniture and boxes moved in today.   I’ll be spending the night in my new room tonight. 🙂  Can you believe the day has finally arrived?  I can’t!

how to install subway tile backsplash

I’m back with a complete how-to on how we added the tile backsplash ourselves, using a new product that I had recently heard about, Bondera.  I got a contact from Bondera and wrote to them, telling them about my upcoming tile project and asked them if they might send me enough of their product for my project.  And they did!  I was so happy to get this in and try in out. Bondera is a tilemat that is sticky on both sides.

Bondera

I received 5 boxes, which covers 10 s.f. per box and we had just enough for this project.  I was so excited to try it out and I’m happy to say,  it worked out great. Thanks to Bondera for supplying this great product!  It worked out very well and we really enjoyed using it.  Much less mess than using thinset, although thinset is cheaper.  Bondera is around $34 a roll, so not cheap.  You have to weigh out mess vs. spending more money.  I would definitely use it again.

Per Bondera’s website, this will NOT work on floor tile, so just be aware of that!

Bondera roll

The roll looks like this out of the box.  It’s thin, but flexible when working with it.

cutting Bondera

We measured our space under the counters and begin putting up the Bondera tilemat.  The good thing is you can cut individual pieces to fill in if needed, like a puzzle.

frontside of Bondera

I used my scissors to cut the tilemat and that worked out great.  The front side is all grids, so it’s easy to cut a straight line.

backside of Bondera

The backside has a clear film that pulls off for applying to the walls.

Bondera grid side

Grids again, front side.

pulling backing off Bondera

The directions said to pull down the film from the backside and place the piece on the wall, pressing the top into place and then pulling the film off to the bottom and that definitely worked well.  This stuff is VERY sticky and will stick to your fingers, to itself and to the wall, so you do have to be a bit careful when handling it.

applying Bondera to wall

The tilemat sticks to the wall and the front film is still in place until you get ready to place the tiles on top.  Then, the top film comes off.  We cut and measured until all our space was filled with Bondera.

Bondera on sink side

Like this.

Bondera above counter

And this.

Bondera up on wall

And this.  Bondera is all ready and in place.

Level

We started here in the middle of this countertop for our rows. Since the countertop is level already it’s not hard to keep your rows straight.  The tiles have a built in spacer on the sides and we just placed them right next to each other, no need for spacers.  I wanted a thin grout line anyway.

how to install subway tile backsplash

These tiles are 3×6” and so you need several 3” tiles cut and ready to go to add to the ends of rows, like this.  It was dad’s smart idea to start next to this end cabinet and place the 3” tiles here on this wall for best visual.  One you start placing the tiles, it goes really fast, except around the outlets and switches.  That’s the part that took the longest, cutting around those.

setting up wetsaw

Dad has a wetsaw that he’s had for years, so we got it out and set up in the backyard. It will sling water, so we wanted a wide open space to work in and luckily we had a good day for it.

tile wetsaw

Getting the tile saw set up.

dad cutting tile

Dad cut most of the tiles and I set most of them.  He measured and cut around the outlets and we placed them as we got to them.

031

We started right here on this big wall and began going in both directions, placing tiles and moving as fast as we could.

rows going in

Adding tiles, row by row.  Then we got to the outlets and had to cut out around them.

placing tile around outlet

We had several on that big wall and cut them as we got to them, filling in all the gaps and kept moving.  The tiles stuck to the Bondera mat really, really well. No problem with them slipping at all.

028

Here are our 3” tiles cut and ready to go.

problem spot below window

The only problem spot we had was under this window sill, where I had repaired the plaster and filled it in with sheetrock mud and tape.  Apparently, it should have dried a lot longer because the Bondera didn’t adhere to this area.  It peeled right off.

problem spot drywall

I was so bummed when we got to this and I realized that it wasn’t sticking, so I cut it off with a utility knife and left this top part open.  I did go back and add more Bondera on here and after pulling off some of the plaster that wasn’t totally set the 2nd time, it seemed to be sticking for the most part.

sink with subway tile

Here’s the After shot, all grouted, so we did make it work and I may have had to get out the Liquid Nails for a couple of pieces.  Smile I’m  sure a professional would shake his head, but we made it work and hopefully it will hold up just fine.  That area will not get a lot of wear and tear, I don’t think.  My sink is so deep that water will not even splash out of it.

rows going in

Back to the tiling process. It’s really not hard, just takes time and patience to make all those cuts around the outlets and fill in all the gaps.  You will have to cut some small slivers of tiles at time on the ends of the row, but for the most part, we made those work out as well. I tried to disguise them as best I could and didn’t take a pic to show you, but we did have some small fill in pieces.

how to install subway tile backsplash

Tile going in, one row at a time.  After we got all the tiles set up and all those gaps filled in, it was time to grout.  YAY!  I will tell you that I had visions of walking in the next day to grout and seeing fallen tiles everywhere, but happily that did NOT happen.

grout and admix

I got the grout bag from Lowes, Mapei Keracolor in Silver and the Grout Admix came from Floor and Décor. It’s a liquid that is mixed with the powder grout and seals the grout instantly, so that it doesn’t ever have to be sealed again. That sold me!  The Grout Admix was $25 at Floor and Décor.  The bag of grout is about $12.  The Bondera directions said to grout within 8 hours, but we didn’t make it in 8 hours.  We got all the tile set in one day and then came back the next morning and grouted.  I’m not sure what the 8 hours thing is all about.

mixed Grout Silver

Grout all mixed and ready to go.  The consistency is about like cake batter.  Thick, but not too thick.  I forgot to take a pic of the grout float I used to spread the grout, but it’s a square rubbery thing with a handle that spreads the grout around. I actually used my index finger a whole lot too, to get it into the crevices.

how to install subway tile backsplash

Get yourself a couple of pans of clean water and at least 2 sponges, because you will go through a lot of dirty water, grouting, wiping and rinsing out the sponges all along the way. I started at the top of this big wall and worked my way down.

how to install subway tile backsplash

I didn’t get a lot of pics of this step and dad took this pic of me in action, but I did one section at a time and then wiped, rinsed, wiped some more until most of the grout was off the tiles.  You don’t want to get too far ahead of yourself, because the grout does start drying pretty fast once it goes up.  You have plenty of time to wipe, but it will begin to set up on the tile face.  I wanted thin grout lines, so I made sure to wipe my sponge over each grout line, taking out any bulky build up of grout.  Thin, thin, that’s what I wanted.

during grout

Here’s a progress pic of the grout on the tiles.  Keep wiping until you get it all off and mostly clean.  Then at the end of the process, I went back with a clean rag and wiped down all the tile one last time, until  it was sparkling and shiny.  And you end up using your fingers a LOT to get it into the crevices.

how to install subway tile backsplash

Here’s the after on the big wall.  It will be getting 2 beautiful rustic shelves soon.  Can’t wait to see those go up.  We marked ahead of time where the studs are in this wall so we can get those brackets in studs.

subway tile with gray grout

Sink wall AFTER.  Just a bit more tweaking in here and I’ll be done completely.  I was so, so happy to get this tile project behind us.  What a milestone!

After Silver grout

You can see at the end of those rows on the right, a small sliver of tile that we had to put in there. I used a white caulk on those, so they wouldn’t stand out as much and need to go back and add a bit more white to them.  Not bad at all.

So, would you attempt your own backsplash after this?  It was a full 3 day project, but well worth it to me.  Here’s what I spent on this project:

Subway tile from Floor and Décor (Interceramic, in Bone):    $88

Grout:  $12

Admix:  $25

Bondera:  No charge, but these cost around $34 a roll. That’s the only drawback, they are a bit pricey compared to buying a bag of thinset for tiling.

Total I spent:  $125 with free labor and a wetsaw

Not bad at all! A lot of bang for the buck.

- Rhoda

Comments

  1. Rhoda I love the tiles!!!! You and your dad did a great job!! I love your kitchen!!

    WAY TO GO GIRL!!!!!!

    Pam
    xox

  2. Looks gorgeous, Rhoda! I’m preparing to do a little tile work myself. Thanks for the great info. I may try this whole Bondera thing. It looks much simpler.

  3. It’s beautiful, Rhoda! I love the subway tile and it looks great with your counters!

  4. Rhoda, The subway tile looks amazing!!! I’ve never heard of Bondera, but it looks a lot easier than having to mess with thinset…So glad you’re moving in (that in itself is a lot of work)….I know you’re estatic…Good Luck, Rhoda…..

  5. That is so cool – i had no idea anything like that was out there! LOVE LOVE the brick laid tile look….did that in my kitchen too…:-)

  6. Suzanne Houston says

    How exciting that you are finally moving in! I have so enjoyed watching the progress on your new home and am so happy for you. Thanks for sharing this experience with us. May you be blessed with many happy memories there. 🙂

  7. I am so excited that you moved into your new dream home. I loved every second of your talk at the Southern Blogger’s Conference and was so looking forward to hearing more about this product!!
    I think the cost is worth it!! I will have to tell my husband about this as we get ready to redo the bath and I wonder if it would work on the floor as well… I imagine it would.
    Love how your kitchen came together!! Thank you for sharing!!
    ~ Lori

  8. Hi, Lori, see comments from me above. Per Bondera, this product will NOT work on floor tile! Thanks for coming by!

  9. Great job, great tutorial. It turned out beautiful. I wish I had my
    dad to help me do some projects. Fun, fun! Thanks.

  10. I love watching you and your parents work together on your projects. My dad taught me so many things about home improvement and since he passed away 21 months ago I miss him so much when I see your dad at work. I know you appreciate their help so much. Give them a big hug every day! Enjoy your new home. You deserve it!!

  11. Hi Rhoda,
    Your kitchen is fantastic and has been a great inspiration as we slowly move along doing our own (with IKEA too :). We did order a sample of the tile from Floor and Decor and would like to now place our final order – are you able to provide me with the color you used: Ultra Brite White or Bright White Ice? Sorry if I missed it, looked back through the tiling blog several times, but couldn’t be certain and we really love the look and would like to order the same. Thanks and congrats on your beautiful new home!!

  12. I just finished the blog. Really very helpful. Thanks for sharing such an amazing blog.
    subway tile

  13. I’m getting ready to re-do my kitchen and ran across your website – great site with helpful information! Is your counter granite or marble?? Do you remember the pattern name, great look! I’ve got a blog myself so I may tie your’s into mine when I start (if you don’t mind?).
    Thanks,
    Kristin

    • HI, Kristin, my granite is Kashmir White and I love it. Sure, no problem you can link to me.

  14. The tile is lovely and I enjoyed reading about the process, but mostly I am in awe of your dad. You surely know how blessed you are to have him. He is a role model of how to age beautifully – giving and doing and creating – still capable and willing. That doesn’t leave much time for a rocking chair and a pity party. Thank you for sharing.

Trackbacks

  1. […] Subway Tile Backsplash @ Southern Hospitality […]

  2. […] about a similar product from Rhoda at Southern Hospitality (who also attended this event), when she tiled her kitchen backsplash using Bondera.  The differences seem to be that SimpleMat costs less ($19.97 versus $38.97 for 10 SF) and […]

  3. […] How to Tile Subway Tile Backsplash using Bondera by Southern Hospitality […]

  4. […] How to Tile Subway Tile Backsplash using Bondera by Southern Hospitality […]

  5. […] mat products, which eliminates the mortar step from the tiling process.  You can check out this one or this one here. We were feeling a little nervous about how durable and the long-term strength of […]

Speak Your Mind

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.